Quality Instructions For Checking Instruments

Keep the instruments in trays with process Traveler.
Compare the instrument with, aster sample or Drawing that it is according to the Pattern.
Check the polish and finish conditions of all instruments.
Check the blades, rings, and joint box that there is no spot, burr, crack, or broken Piece.
Check the 100% cutting instruments through cutting a cloth piece and check that the Cutting is sharp and perfect. Be sure the blades are equal and sharp and cutting Smoothly.
Check that the serrations of forceps are perfect and the joint box is working properly.
Ensure that the needle holder can catch suture thread from its center and corners.
The elastic of Dressing, Adson, and Iris Forceps are satisfactory, while punching these Instruments, the serration teeth fit on his places and size is also must be the same.
Check that the Etching on instruments is perfect and don’t send any instrument for Packing without etching.
Reworkable instruments must be identified with red ink.
Rejected instruments kept in rejected boxes or trays.
Make an entry on the traveler card after complete the work.